Wir begrüßen Sie wieder im Blog „Fragen Sie den Experten“, in dem die Ingenieure von Smalley häufig und dgestellte Fragen zum Design von Sicherungsringen und Wellenfedern beantworten. Diese Woche geben unsere Ingenieursfachleute Auskunft über den Austausch von Wellenscheiben und den Unterschied zwischen Überlappungs- und Spaltwellenfedern.
Das ist eine gute Frage, denn Edelstahl mit schlechteren Federeigenschaften, als sie ein federgehärteter Kohlenstoffstahl aufweist, ist für viele Ingenieure ein alltägliches Problem. Die meisten sind es gewohnt, 302er Edelstahl für Federn zu benutzen, die nicht dieselben Federeigenschaften aufweisen wie federgehärteter Kohlenstoffstahl. Smalley verwendet jedoch Edelstahl 17-7 PH, Zustand CH900 für seine Federn. 17-7 hat Federeigenschaften, die denen des federgehärteten Kohlenstoffstahls recht nahe kommen. Er erfordert nicht die Beachtung der Regel "20% weniger Last", die normalerweise auf 302er Edelstahlfedern angewendet wird.
Smalleys Ingenieure können Ihnen ein Standardbauteil empfehlen oder eine spezielle Wellenfeder aus 17-7-PH-Edelstahl entwerfen, die Ihren Anforderungen entspricht. Eine Prüfliste für die Federauslegung kann zur Bestimmung der Anforderungen herangezogen werden.
Zumeist verhalten sich Überlappungs- und Spaltwellenfedern ähnlich. Beide sind mit freien Enden ausgeführt, damit der Außendurchmesser beim Zusammendrücken der Feder die Bohrung ohne Bindung berühren kann. Die Überlappungsfeder hat aufgrund der überlappenden Enden eine größere feste Höhe als die Spaltfeder; die überlappenden Enden verhindern jedoch, dass sich die Federn in der Umhüllung verfangen. Wenn Sie weitere Fragen zu den Unterschieden zwischen Spalt- und Überlappungsfedern und deren Auswirkungen auf Ihren Verwendungszweck haben, wenden Sie sich bitte an Smalley Engineering.
Wellenfeder mit Spalt Wellenfeder mit überlappenden Enden
Mit uns verbinden